Friday, August 10, 2012

Down under pt6...

With the car out of the garage for the second time and both near side wheels up on the ramps, I wire brushed the surface rust off the floorpan, also removing the under seal from the sill.

Cleaned up an area just in front of the trailing arm fixing point which has a split in the metal on the angle – this is going to need repairing.

Also cleaned off the filler from the rear sill/lower panel - not as bad as the other side.

Finished off with a coat of Hammerite Rust Beater.

4 hrs









No comments:

Post a Comment