Engine rebuild pt2...

Oh the joys of restoration - crankshaft caps bolts torqued to 65 Ibs ft and then the big end caps - tighten them by hand first and with the torqued wench to 45 Ibs ft. Pistons 2 and 3 were fine but a couple of nuts on 1 and 4 didn't seem to be getting there.

I undone both to see if the treads were stripping but both looked ok, so started again and snap! With one bolt broken and the other with a hairline fracture - new nuts and bolts to order.

So with that setback and my finger getting colder, I continued with fitting the jackshaft in to the block and camshaft to the head.

3hrs